Updated November 2026
To measure air quality index, you either read a published AQI for your area or use a monitor that calculates it from measured pollutant levels. This guide explains how the AQI is built, how to get an accurate reading for your home or neighborhood, and how to interpret the number once you have it.
Understand What the AQI Actually Measures
The Air Quality Index is a scale from 0 to 500 that converts concentrations of regulated pollutants into one easy-to-read number. In the United States, the EPA uses five main pollutants: fine particles (PM2.5), coarse particles (PM10), ozone, carbon monoxide, sulfur dioxide and nitrogen dioxide. Each pollutant gets its own sub-index, and the overall AQI is the highest of those sub-indexes. That is why one pollutant can drive the whole reading, even when the others are low.
Shopping for one? See our guide: 5 Best Air Purifiers for Air Quality Index Delhi (2026): Expert Picks.
Choose Your Measurement Method
You have two practical routes. The first is to look up the official AQI for your location from a government monitoring network. Those readings come from regulatory-grade stations that are calibrated and maintained on a schedule. The second is to measure locally with a consumer sensor, which shows you conditions at your own address. Outdoor official readings describe the broader area, while a home sensor can catch what is happening near a kitchen, a garage or a busy road.
Checking an Official Outdoor Reading
Search for the AirNow website or app, enter your ZIP code, and note the current AQI, the dominant pollutant and the category (Good, Moderate, Unhealthy for Sensitive Groups, and so on). Many local agencies also publish hourly data, which is useful if you want to see when conditions peak.
Setting Up a Home Monitor
If you want a reading for your own space, a consumer monitor that reports PM2.5 is the most useful starting point, because fine particles drive most AQI readings in many regions. Place it at breathing height, away from walls, windows, cooking appliances and vents. Let it run for at least 24 hours before drawing conclusions, since levels shift quickly with cooking, cleaning and outdoor air coming in.
Convert Readings into a Usable AQI
Many monitors display a raw concentration in micrograms per cubic meter (µg/m³) rather than an AQI. To convert PM2.5 to AQI, compare your value to the EPA breakpoint table and apply the linear formula within the matching range. The breakpoints for PM2.5 are updated periodically, so confirm the current table on the EPA website before you rely on a manual calculation.
| AQI Range | Category | What It Means |
|---|---|---|
| 0–50 | Good | Air quality is satisfactory for most people. |
| 51–100 | Moderate | Acceptable, but unusually sensitive people may notice effects. |
| 101–150 | Unhealthy for Sensitive Groups | Children, older adults and people with heart or lung conditions should reduce exertion outdoors. |
| 151–200 | Unhealthy | Everyone may begin to experience effects. |
| 201–300 | Very Unhealthy | Health alert; everyone should limit outdoor exposure. |
| 301–500 | Hazardous | Emergency conditions; stay indoors with filtration running. |
Read the Number in Context
An AQI reading is a snapshot, not a forecast. Check whether the reading is rising or falling, and note the time of day. Wildfire smoke, traffic peaks and indoor cooking often show distinct patterns. Compare indoor and outdoor values: if your indoor PM2.5 is well above the outdoor level, the source is probably inside, and ventilation or filtration will help more than closing windows alone.
Common Mistakes to Avoid
- Placing a monitor near a stove, candle, humidifier or open window, which skews the reading.
- Treating one short spike as a typical level. Look at averages over several hours or days.
- Mixing units, such as comparing a µg/m³ value directly against an AQI threshold.
- Assuming a low AQI means no pollutant is present, since some compounds are not included in the index.
- Using outdated breakpoint tables after the EPA revises them.
Recommended Gear
A basic particle monitor that reports PM2.5 gives you the clearest view of most AQI changes at home: View on Amazon.
If you want to track readings over time, a monitor with a companion app that logs data helps you spot patterns: View on Amazon.
FAQ
Is the AQI the same as the amount of pollution?
No. The AQI is a scaled index that translates pollutant concentrations into a 0–500 range. Two places can have the same AQI while the underlying pollutants differ.
Can a home monitor replace official readings?
It complements them. Official stations are calibrated against reference methods, while consumer sensors are useful for seeing local, indoor and short-term changes.
How often should I check the AQI?
During smoke events or high-pollution days, check at least a few times a day. On typical days, checking once in the morning and again before outdoor activity is enough.
Conclusion
To measure the air quality index, start with an official reading for your area and add a home monitor if you want local detail. Convert raw concentrations using the current EPA breakpoints, and read the result in context of timing and indoor sources. If you have a health condition, talk to your doctor about how to act on high readings.
Related reading
- Michigan Air Quality Index: What the Numbers Mean and How to Protect Your Home
- Medford Air Quality Index: What the Numbers Mean and How to Protect Your Home
- Air Quality Index Colorado: What the Numbers Mean and How to Protect Your Home
- Air Quality Index Boise: What the Numbers Mean and How to Protect Your Home
- What Is Air Quality in Washington DC and How Do You Protect Your Home?

