Updated November 2026

The air quality index by zip code tells you how polluted the air is in your specific neighborhood, not just your city or state. In this guide, you will learn where to find a zip-code-level reading, how to interpret the number and color category, and what to do indoors when the index climbs. Most of the steps take less than five minutes once you know where to look.

Where to Find AQI Readings for Your Zip Code

The most reliable free source is AirNow, the U.S. Environmental Protection Agency’s public site. Enter your zip code and it returns the current Air Quality Index along with the main pollutant driving the reading. Many weather apps and local news sites pull from the same government monitors, though some display forecasts rather than current readings, so check which one you are looking at.

Shopping for one? See our guide: 5 Best Air Purifiers for Air Quality Index Delhi (2026): Expert Picks.

Keep in mind that monitors are often miles apart. A zip code reading reflects the nearest station, and the air a few blocks away near a highway or industrial site can differ. If your zip code has no station nearby, look at the reading from the closest monitor and treat it as an estimate.

How to Read the Number and Category

The AQI runs from 0 to 500. The EPA groups it into color-coded categories, and each one carries a general health message. The table below summarizes the standard breakpoints.

AQI Range Category General Meaning
0 to 50 Good Air quality is satisfactory with little risk
51 to 100 Moderate Acceptable, but unusually sensitive people may notice effects
101 to 150 Unhealthy for Sensitive Groups Children, older adults, and people with asthma or heart disease should limit outdoor exertion
151 to 200 Unhealthy Everyone may begin to feel effects; sensitive groups should avoid prolonged outdoor exertion
201 to 300 Very Unhealthy Health alert; everyone should reduce outdoor activity
301 and above Hazardous Emergency conditions; everyone should stay indoors

Look at the pollutant named with the number, too. Fine particles (PM2.5) usually come from smoke and traffic, while ozone builds up on hot, sunny days. The advice for each differs slightly, and a PM2.5 spike calls for more indoor filtration than an ozone spike.

Steps to Protect Your Home When the AQI Rises

Once you know your zip code’s reading, you can act on it. Start with the basics before buying anything.

  1. Check the AQI each morning and again in the afternoon, since readings can shift within hours.
  2. Close windows and exterior doors when the index moves into the Unhealthy for Sensitive Groups range or higher.
  3. Set your HVAC system to recirculate and, if it has one, install a filter rated MERV 13 or higher where your system supports it.
  4. Run a portable air purifier with a true HEPA filter in the rooms where you spend the most time, sized to the room’s square footage.
  5. Avoid candles, frying, and vacuuming without a HEPA-equipped vacuum while the index is elevated, because these add particles indoors.

Pay attention to the room size and clean air delivery rate (CADR) rating on any purifier you consider. A unit rated for a smaller room will struggle to clean a larger one, even on high speed.

Checklist: What You Need

  • Your five-digit zip code and a bookmarked AirNow page or trusted local source
  • A thermometer or phone alert for the day’s AQI threshold
  • A portable HEPA purifier sized for your largest regular room
  • Replacement HVAC filters, checked on the manufacturer’s schedule

A portable HEPA air purifier is the most direct way to filter indoor air during a smoke or pollution event, and many people keep one in the bedroom. Choose a model whose CADR matches your room size.

A higher-MERV replacement furnace filter helps whole-house filtration, though check that your system can handle the added airflow resistance. View on Amazon

An indoor air quality monitor lets you see particle levels inside your home, so you can tell whether your filtration is working. View on Amazon

Common Mistakes and Tips

  • Assuming your zip code reading applies to your exact block. Monitors can be several miles away.
  • Ignoring the pollutant type. Smoke and ozone call for different responses.
  • Running a purifier on low in a large room and expecting full results.
  • Forgetting that opening windows for “fresh air” during a high-AQI day brings pollution inside.
  • Waiting until a bad reading to change filters. Replace them on schedule so they work when you need them.

FAQ

Is the AQI by zip code the same as the air inside my home?

No. The zip code reading measures outdoor air at the nearest monitor. Indoor air depends on how well your home seals, how often you ventilate, and what filtration you run.

How often does the AQI by zip code update?

Most government sources update hourly, though some apps refresh less often. Check again during the day if the forecast is changing.

What AQI level means I should stay indoors?

Sensitive groups should limit outdoor activity starting around 101, and the EPA advises everyone to reduce strenuous outdoor exertion at 151 and above. Consult your doctor for personal guidance if you have a heart or lung condition.

Conclusion

Checking the air quality index by zip code takes minutes, and it gives you a clear basis for daily decisions. Pair the reading with a few indoor steps and you will know when to close up, filter, and wait. For more local context, see Air Quality Index Seattle Today: What the Numbers Mean and What to Do or Air Quality Index in Los Angeles Today: What the Numbers Mean and What to Do.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our indoor air guides, checking product details against manufacturer specifications and owner feedback.