Updated November 2026

An air quality USA map shows real-time Air Quality Index (AQI) readings for locations across the country, usually color-coded from green (good) to maroon (hazardous). The most reliable versions come from AirNow.gov, run by the U.S. Environmental Protection Agency, and from PurpleAir, which draws on a dense network of community sensors. Checking one before you plan outdoor activity or open a window can tell you more than a general weather forecast.

Why a Map Beats a Single City Reading

Air quality can change sharply over short distances. A wildfire plume, a temperature inversion trapping pollution near the ground, or a dust storm may affect one county while the next stays clear. A national map shows these patterns at a glance, which a single city forecast often misses. Regulatory monitors on the EPA map are sparse in rural areas, so sensor networks fill gaps, though their readings are less precise and are best used as a trend indicator rather than an exact measurement.

Shopping for one? See our guide: 5 Best Air Purifiers for Air Quality Index Delhi (2026): Expert Picks.

How to Read the Colors and Numbers

Each color on an AQI map corresponds to a range of pollutant concentrations, most often fine particles (PM2.5) or ozone. The categories are:

  • 0–50 (Green, Good): Air quality is satisfactory with little health concern.
  • 51–100 (Yellow, Moderate): Acceptable, though unusually sensitive people may notice effects.
  • 101–150 (Orange, Unhealthy for Sensitive Groups): Children, older adults and people with asthma or heart conditions should reduce prolonged outdoor exertion.
  • 151–200 (Red, Unhealthy): Everyone should limit outdoor exertion.
  • 201–300 (Purple, Very Unhealthy) and 301+ (Maroon, Hazardous): Avoid outdoor activity and keep indoor air as clean as possible.

Check whether a map shows PM2.5 or ozone, since the readings can differ and the worst pollutant governs the overall number.

What to Do When the Map Turns Orange or Worse

Your indoor air depends on how well you seal the house and how you filter it. A practical response on a bad day looks like this:

  1. Close windows and doors, and set your HVAC system to recirculate.
  2. Upgrade to a MERV 13 or higher filter if your system can handle the added resistance.
  3. Run a portable air purifier with a HEPA filter sized for your room. Check the manufacturer’s CADR rating against your room area.
  4. Avoid vacuuming without a HEPA-equipped vacuum, burning candles, or frying food, which add particles indoors.
  5. Reschedule exercise to a time when the map shows improvement, often early morning or after a rain.

If you have a respiratory condition, follow your doctor’s guidance on when to take extra precautions.

What We’d Use

For a single bedroom or living room, a HEPA air purifier with a CADR suited to your room size is the most direct upgrade. View on Amazon is a widely sold option with a HEPA filter and a compact footprint.

For whole-house protection, a higher-MERV furnace filter helps reduce particles circulating through the ducts. View on Amazon is a commonly stocked choice for homes with compatible HVAC systems.

FAQ

Is the AirNow map more accurate than PurpleAir?

AirNow uses regulatory-grade monitors, which are generally more accurate. PurpleAir offers far more locations, so it is useful for spotting local trends, though individual sensors can vary.

How often do air quality maps update?

Most update hourly, and many AQI values are averaged over a rolling period. Check the timestamp on the map before relying on it.

Should I rely only on a map to decide whether my home is safe?

A map shows outdoor conditions only. Indoor air can be better or worse depending on your filtration and sealing. For concerns about health or a specific indoor source, consult a physician or a qualified indoor air professional.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our indoor air guides, checking product details against manufacturer specifications and owner feedback.