Updated November 2026

Air quality is measured by sampling the air and counting or weighing specific pollutants, such as fine particles (PM2.5 and PM10), ozone, nitrogen dioxide, sulfur dioxide, carbon monoxide and lead. Government monitoring stations use reference-grade instruments, and the results are converted into a single index number, the Air Quality Index (AQI), so people can compare conditions quickly. Home devices work on the same principle but with simpler sensors.

Why measurement uses specific pollutants

No single reading captures “clean” or “dirty” air. Each pollutant comes from different sources and affects the body differently. Particle counters pick up smoke, dust and vehicle exhaust. Gas sensors pick up combustion byproducts and ozone. Because a pollutant can be present at a harmful level even when others are low, agencies track several at once and report the worst one as the headline number.

Shopping for one? See our guide: 5 Best Air Purifiers for Air Quality Index Delhi (2026): Expert Picks.

For the outdoor AQI in the United States, the EPA uses a scale from 0 to 500. Values from 0 to 50 are rated “Good,” 51 to 100 “Moderate,” 101 to 150 “Unhealthy for Sensitive Groups,” and higher values move into “Unhealthy,” “Very Unhealthy” and “Hazardous.” Each pollutant has its own breakpoints, and the highest sub-index sets the overall AQI.

The main methods and factors involved

Professional networks use three main approaches:

  • Reference monitors draw air through a fixed inlet, collect particles on filters, or use chemical analyzers. They are accurate but expensive and placed at fixed sites.
  • Optical particle counters shine a light through a sample of air and measure how much it scatters. Many low-cost sensors use this method for PM2.5.
  • Electrochemical or metal-oxide sensors react with gases such as carbon monoxide or nitrogen dioxide and produce a small electrical signal. They drift over time and often need calibration.

Readings also depend on sensor placement, humidity and temperature. Humidity can make particle sensors read high, so better consumer monitors compensate for it. If you compare a home monitor to a public station, expect some difference, especially indoors where sources are local.

What to do with the numbers

A reading is only useful if you know how to act on it. Start by checking the outdoor AQI for your area and the indoor particle level in the room you use most. Then take these steps:

  1. Compare indoor PM2.5 with the outdoor reading to see whether your home is filtering outside air or adding its own particles.
  2. Run a portable air cleaner with a true HEPA filter in the room where you spend the most time.
  3. Keep windows closed on high-AQI days and set your HVAC fan to recirculate with a filter rated MERV 13 or higher, if your system supports it.
  4. Avoid candles, frying and wood smoke indoors when outdoor levels are already elevated.
  5. If you have asthma, heart or lung conditions, follow your doctor’s guidance on when to limit outdoor activity.

For a broader picture of your home, see How to Test Indoor Air Quality at Home: 6 Steps and Tools (2026) and Pm2 5 Air Quality: What the Numbers Mean and How to Improve Yours, which explain how to read particle data in practical terms.

What we’d use

For a continuous view of fine particles at home, a dedicated indoor particle monitor is the most practical choice. View on Amazon

To clean the air once you know what is there, a portable unit with a true HEPA filter suits most bedrooms. View on Amazon

FAQ

Is a home air quality monitor as accurate as a government station?

No. Government stations use reference-grade equipment that is calibrated and maintained. Home monitors are useful for spotting trends and comparing rooms, but treat their absolute values as estimates.

What does an AQI of 75 mean?

An AQI of 75 falls in the “Moderate” range. Air quality is acceptable for most people, though unusually sensitive individuals may notice symptoms from prolonged exposure.

Why does my indoor reading spike when I cook?

Cooking, especially frying and high-heat searing, releases fine particles and gases. Running a range hood vented outdoors or a purifier nearby reduces the spike quickly.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our indoor air guides, checking product details against manufacturer specifications and owner feedback.