Updated November 2026

A map of air quality is a visual display that shows pollution levels across a region, usually using color-coded zones tied to the Air Quality Index (AQI). Each colored area reflects a measured or modeled reading for pollutants such as fine particles (PM2.5), ozone and nitrogen dioxide. Most maps update hourly, so you can see where air is clean, where it is unhealthy and how conditions are shifting.

Why a Map Helps More Than a Single Number

A single city reading can hide large differences. Monitoring stations are often miles apart, and a neighborhood near a highway, a construction site or a wildfire plume may run much higher than the official reading downtown. A map fills in those gaps, showing you the pattern rather than one point. It also reveals movement: smoke plumes and ozone build-up often travel, so a map lets you see whether conditions are heading toward you.

Shopping for one? See our guide: 5 Best Air Purifiers for Air Quality Index Delhi (2026): Expert Picks.

How to Read the Colors and Factors

Most maps use the same six-level AQI scale: green for good, yellow for moderate, orange for unhealthy for sensitive groups, red for unhealthy, purple for very unhealthy and maroon for hazardous. The AQI reflects the worst pollutant at that location, so a map may show orange because of ozone on a hot afternoon even when particle levels are low. Check which pollutant is driving the reading, since that tells you what kind of protection matters most.

Keep two details in mind. First, maps often show outdoor air only. Indoor levels depend on how tight your home is, whether windows are open and whether you run filtration. Second, forecast layers can differ from current readings, so confirm which one you are looking at.

Using a Map to Protect Your Home

A map is most useful when you act on it. Use it to decide when to ventilate and when to seal up. The steps below work for most households.

  1. Check the map for your exact address or the nearest station, not just the city name.
  2. Note the dominant pollutant and whether readings are rising or falling over the next several hours.
  3. When outdoor readings are green or yellow, open windows briefly during cooler hours to refresh the air.
  4. When readings reach orange or higher, close windows and doors and run a portable air purifier with a HEPA filter on the bedroom and main living area.
  5. Check the filter’s condition and replace it on the schedule the manufacturer specifies, since a clogged filter cannot clean air effectively.
  6. Keep a simple log of readings and symptoms. Patterns over a few weeks often reveal your personal triggers.

People with asthma, heart or lung conditions, and young children or older adults should follow the health guidance that accompanies the AQI category. If you have symptoms or a condition that worsens with pollution, consult a doctor or healthcare professional about a personal plan.

What We’d Use

A portable HEPA air purifier sized for your room is the most direct way to act on a poor-air forecast. Look for a model whose stated coverage area matches the room you plan to use it in: View on Amazon.

For monitoring the air where you actually live, a consumer indoor air quality monitor that reports PM2.5 can show whether your home is tracking the outdoor map: View on Amazon.

FAQ

Is a map of air quality accurate for my street?

It is accurate for the monitored point and estimated for nearby areas. Readings near busy roads or fires can differ, so treat the map as a guide and check your local station’s data when possible.

Which color means I should stay indoors?

Red and above generally call for limiting outdoor activity for everyone. Orange is a warning for sensitive groups. Those who are sensitive should consider staying inside when orange appears.

Do I need a map if I have an air purifier?

Yes. A purifier cleans the air inside, but the map tells you when to run it hard, when to ventilate and when to keep windows shut.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our indoor air guides, checking product details against manufacturer specifications and owner feedback.