Updated November 2026
Will a dehumidifier help with mould? Yes, in most cases it will stop new mould from forming and slow down existing growth, because mould needs moisture to germinate and spread. It will not remove visible mould from walls, fabric or wood, though. This guide explains how to tell whether humidity is your real problem, how to set up a dehumidifier so it actually works, and when you need to clean or replace materials instead.
Why a Dehumidifier Helps Mould Prevention
Most household mould needs relative humidity above roughly 60 percent for long stretches, and many species do better at 70 percent or higher. Moisture from showers, cooking, drying laundry and damp crawl spaces keeps surfaces wet enough for spores to take hold. Lowering the air’s moisture content removes the condition mould depends on, which is why a dehumidifier is effective as prevention. It works best in damp basements, closets, bathrooms without good ventilation and rooms over crawl spaces.
Shopping for one? See our guide: HWD-45 Wall Mounted Horizontal Dehumidifier Review (2026).
How to Use a Dehumidifier to Control Mould
A dehumidifier only helps if it runs enough hours at the right setting for your space. Follow these steps:
- Measure current humidity with a cheap digital hygrometer placed at wall height, away from the unit.
- Size the dehumidifier to the room. Manufacturers rate units by pints removed per day at a standard test condition, so a larger, damper space needs a higher capacity.
- Set the target humidity to 50 percent or lower. Many models have a built-in humidistat for this.
- Place the unit in the center of the room with at least 12 inches of clearance on all sides, and keep doors and windows closed while it runs.
- Empty the bucket daily or connect a drain hose if the model supports continuous drainage.
- Recheck the hygrometer after a week. If readings stay above 60 percent, the unit is undersized or the moisture source hasn’t been fixed.
What a Dehumidifier Cannot Fix
A dehumidifier does not kill mould, and it does not clean up what is already on surfaces. Spores stay in place after the air dries out, and dormant colonies can reactivate if humidity rises again. Some materials, such as drywall with deep staining, carpet padding or insulation, may need to be removed rather than cleaned. For a more detailed breakdown of the limits, see Will Dehumidifier Kill Mold? What It Can and Can't Do. Air purifiers have a similar gap; Will an Air Purifier Help With Mold? What Works and What Doesn't covers why filtration alone rarely solves a mould problem.
Fixing the Moisture Source Comes First
If water is entering the space, a dehumidifier will run constantly and still lose the battle. Look for and address the source before expecting results:
- Leaks in pipes, roofs, gutters or window seals
- Poor grading that sends rainwater toward the foundation
- Bathroom and kitchen exhaust fans that vent into the attic or are not used
- Uninsulated cold walls or pipes where condensation forms
Once the source is fixed, the dehumidifier can keep the air dry enough to prevent regrowth. For sizing guidance on units that handle larger spaces, see Frigidaire 50 Pint Dehumidifier: Setup, Sizing, and Maintenance Guide.
Common Mistakes
- Running the unit with doors open, which pulls damp air in from other rooms.
- Setting the humidistat too high, often 60 percent or more, which leaves mould conditions in place.
- Ignoring the water bucket, which can shut the unit off mid-cycle.
- Blocking airflow with furniture or placing the unit against a wall.
- Assuming dry air means mould is gone. Visible growth still needs cleaning.
Recommended Gear
- Digital hygrometer: Tracks humidity at wall height so you can confirm the dehumidifier is reaching 50 percent or lower. View on Amazon
- Portable dehumidifier with auto-shutoff: Stops when the bucket is full or the target humidity is reached, which suits basements and closets. View on Amazon
- Mould-cleaning kit with N95 mask and gloves: Useful for removing surface growth on hard materials before drying the area. View on Amazon
FAQ
Can a dehumidifier get rid of mould that is already growing?
No. It can slow further growth by drying the air, but visible mould still needs to be cleaned from surfaces, and porous materials with heavy growth may need replacing.
What humidity level stops mould from growing?
Keeping indoor relative humidity at or below 50 percent is the usual target, since most mould struggles to grow below about 60 percent.
How do I know if the dehumidifier is working?
Check a hygrometer over several days. Steady readings at or below your target, plus a bucket that fills regularly, show the unit is removing moisture.
Conclusion
A dehumidifier is a useful tool for keeping mould from returning, provided humidity is the real cause and the unit is sized and set correctly. It won’t remove mould that is already present, so clean visible growth and fix leaks or ventilation problems first. If the mould covers a large area or keeps coming back, consult a qualified mould remediation professional or a building inspector.

